Activator Cyanocrylate

Activator21 is specially formulated to accelerate the drying of cyanoacrylate glue. It has two application systems: it can be used with the diffuser quickly and comfortably, or with the brush inside for greater precision. This means that even the smallest parts can be joined almost immediately and for a very long time. It can be applied using two different methods:

• Before applying cyanoacrylate Moisten the surface of the joint with the product and allow it to evaporate for 10-15 seconds. Then apply the glue and quickly join the two pieces together. The parts will bond almost immediately.
• After application of cyanoacrylate Once the parts are assembled, apply Activator to the cyanoacrylate. The joint will harden completely in 2-3 seconds, creating a very strong bond.

Make sure the container is well sealed. Use the gas pedal with appropriate protective equipment, including gloves, clothing and eye protection when working in a well-ventilated area. Keep away from heat. Keep out of reach of children. Avoid contact with skin and eyes.