Bittydesign Maskmask Liquid

Ideal for paint a body, the liquid masking will save you time and allow you to create beautiful artistic paintings.

Don't waste any more time taping thanks to this liquid masking bittydesign a revolutionary product. What's more, it's easier to apply than tape, and reduces or eliminates air bubbles under cut-outs.

Highly resistant to paint coatings, your liquid masking remains intact even after take-off. Don't hesitate to achieve sharper, more precise work.

Bittydesign liquid masking 448ml is a solid, fast-drying product. It is also very easy to apply with an airbrush.

For lexan, helmet, plastic and much more. Use your liquid masking for aircraft, boats, cars, motorcycles, etc.

Bittydesign Maskmask Liquid will help you with your paint job. You'll save time, get a better quality final paint job and have fun while you're at it.

Step 1 - The product is ready to use and does not need to be diluted. Apply the product using a soft bristle brush, 3cm wide, or a spray gun.

Step 2 - LM works best if it dries normally, e.g. overnight. When 1st coat is dry (to speed up LM drying you can put the work in front of a hot air stream) spread a 2nd coat of LM.

Step 3 - If you want to use toxic (solvent-based) paints, we suggest you apply a 3rd coat of LM.

If you're using water-based colors, 2 coats of LM are sufficient and you don't need to apply a 3rd coat. You can always apply 3 coats of LM to your work, making it easier to remove.

Step 4 -Take care when cutting, and try to apply the right cutting pressure to avoid damage to the work. The cutting line should be a single pass, no more. If necessary, change the cutting blade frequently.

Step 5 - Remove the LM film from the area. Take care during this important moment of peeling, paying attention to the advice in step 4. Always remove LM in the same direction. During this peeling moment, try not to touch the paint area.

Don't forget to check out our range of masking film as well as our range of masking tape and all our cutting tools for perfect results.