Bittydesign Liquid Masking 996ml
Référence : BD-LM32
€24.92
Tax included
- Replaces complicated masking tape jobs.
- For lexan, helmet, plastic and more.
- Clean paint lines.
- Dries in minutes.
- Drying can be accelerated with hot air.
- Capacity: 996ml
Paiement sécurisé
Livraison 72h
A propos du produit
Description
Bittydesign Maskmask Liquid
For lexan, helmet, plastic and more.
Bittydesign Maskmask Liquid will help you with your painting. You save time, you have a better final paint quality and have fun while you're at it.
Step 1 - The product is ready-to-use and you don't need to dilute it. Apply the product using a soft bristle brush, 3 cm wide, or a spray gun.
Step 2 - LM is most effective when dried normally, e.g. overnight. When 1st coat is dry (to speed up LM drying, you can place the work in front of a hot air stream), spread a 2nd coat of LM.
Step 3 - If you want to use toxic (solvent-based) paints, we suggest you apply a 3rd coat of LM.
If you're using water-based colors, 2 coats of LM are sufficient and you don't need to apply a 3rd coat. You can also always apply 3 coats of LM to your work, it will be easier to remove LM.
Step 4 -For cutting, fake care when performing this operation, and try to apply the correct cutting pressure to avoid damage to the workpiece. The cutting line should be a single pass, no more. If necessary, change the cutting blade frequently.
Step 5 - Remove the LM film from the area. Take care during this important moment of peeling, paying attention to the tips in step 4. Remove LM always in the same direction. While peeling, try not to touch the paint area.